Contacting Draytek - Draytek vigor2760 series User Manual

H a r d w
H a r d w
While the router is running (ACT LED blinking), press the Factory Reset button and hold for
more than 5 seconds. When you see the ACT LED blinks rapidly, please release the button.
Then, the router will restart with the default configuration.
After restore the factory default setting, you can configure the settings for the router again to
fit your personal request.
5 . 7 C o n t a c t i n
5 . 7 C o n t a c t i n
If the router still cannot work correctly after trying many efforts, please contact Draytek or
your dealer for further help right away. For any questions, please feel free to send e-mail to
support@DrayTek.com.
Note: If synchronization issue for xDSL happened to the router, please send an e-mail to
support@DrayTek.com.
Vigor2760 Series User's Guide
a r e R e s e t
a r e R e s e t
g D r a y T e k
g D r a y T e k
450