Application - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210/296/310, application A237/A337

5.8 Application

The section "Application" describes specific application related
issues.
Some of the parameter descriptions are universal for different
application keys.
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
MENU > Settings > Application
ECA addr. (ECA address, choice of Remote Control Unit)
Decides the room temperature signal transfer and communication with the
Remote Control Unit.
See Appendix "Parameter ID overview"
OFF: No Remote Control Unit. Only room temperature sensor,
if any.
A:
Remote Control Unit ECA 30 / 31 with address A.
B:
Remote Control Unit ECA 30 / 31 with address B.
VI.LG.R3.02
1x010
The Remote Control Unit must be set accordingly (A or B).
© Danfoss | 2017.05 | 83