Danfoss ECL Comfort 210 Operating Manual page 53

Operating Guide ECL Comfort 210/296/310, application A237/A337
Setting
P demand
Ch.-o. valve / P (changeover valve / pump)
DHW priority (closed valve / normal operation)
Tank, sec. / prim. (Tank secondarily or primarily connected)
Circ. P priority
P charge delay (Charging pump, delayed start)
Flow T adapt time (Flow temperature, adaptation time)
Circ. P frost T
P frost T (circulation pump, frost protection temp.)
P heat T (heat demand)
Priority (priority for return temp. limitation)
Frost pr. T (frost protection temp.)
Input type
Limit (limitation value)
Adapt. time (adaptation time)
Filter constant
Pulse
Units
High limit Y2 (flow / power limitation, high limit, Y-axis)
Low limit Y1 (flow / power limitation, low limit, Y-axis)
Low T out X2 (flow / power limitation, low limit, X-axis)
High T out X1 (flow / power limitation, high limit, X-axis)
Ext. input (external override)
Ext. mode (external override mode)
Upper difference
Lower difference
Delay, example
Lowest temp.
Max. charge T (maximum heating / charging temperature)
Motor pr. (motor protection)
Temp. min.
Temp. max.
Summer, cut-out (limit for heating cut-out)
Infl. - max. (room temp. limitation, max.)
Infl. - min. (room temp. limitation, min.)
Xp (proportional band)
Tn (integration time constant)
M run (running time of the motorized control valve)
Nz (neutral zone)
Min. act. time (min. activation time gear motor)
Charge difference
Stop difference
VI.LG.R3.02
ID Page
1x050 86
1x051 86
1x052 87
1x053 87
1x055 87
1x059 88
1x068 97
1x076 88
1x077 88
1x078 88
1x085 66
1x093 89
1x109 69
1x111 70
1x112 70
1x113 70
1x114 70
1x115 70
1x116 71
1x117 71
1x118 72
1x119 72
1x141 89
1x142 90
1x147 103
1x148 103
1x149 104
1x150 104
1x152 97
1x174 80
1x177 58
1x178 58
1x179 78
1x182 60
1x183 61
1x184 81
1x185 81
1x186 81
1x187 81
1x189 82
1x193 97
1x194 98
Factory settings in circuit(s)
1
© Danfoss | 2017.05 | 53
2