Table of Contents
Advertisement
HFX Product Family
3.0
KEY FEATURES
Robust, compact, fully sealed & potted cast
•
aluminum construction
Completely protected outputs
•
(thermal and overcurrent)
Reverse polarity protection
•
Up to 24 multifunction inputs, depending on
•
model
Up to 24 multifunction outputs, depending on
•
model
Diagnostic feedback for short circuit & wire
•
break on all outputs
Use of proven Deutsch connectors for rigorous IP
•
protection
Programmable via CAN via E - COM® or Kvaser®
•
Three CAN ports
•
Sleep input for improved power management
•
Regulated supply for sensors
•
Three programmable LED status indicators
•
4.0
SAFETY CONSIDERATIONS
Note: This operating and installation manual is intended for use
by a competent programmer, electrician, technician, or
engineer. The instructions included in this manual should be
read and kept as a reference document prior to initial
controller installation and use. Incorrect operation of these
controllers can present a signi cant threat to both individuals
and equipment. In the event of an equipment break down, do
not attempt to repair the controller as there are no user
serviceable parts inside the enclosure. Any evidence of
tampering will invalidate the warranty.
5.0
APPLICATION
This operating and installation manual should be used in
conjunction with the hfx_capi_manual.pdf. Together, this
information should form a basis for the simple con guration of
the controller and the creation of programs speci c to your
application need s. Proper operation of the controller is
dependent on the program that is created and ultimately
downloaded to the hardware, therefore extensive testing is
required. Customers programming the controller possess the
responsibility of ensuring that both the hardware and software
performs as intended with their applications.
Note: That each controller within the HFX product family requires the
installation of the HFX C-API SDK, service tool and CAN adapter drivers
before initial use in the application env ironment. The HFX C-API SDK
requires MS Windows® 7 or greater
.
8
HFX Product Family Installation and Operation Manual for C-API April 2017
6.0
HARDWARE DESCRIPTION
The Danfoss HFX product line consists of four controller
models (HFX12m, HFX20m, HFX32m, and HFX48m), each
possessing a unique number of I/O. The HFX12m/ HFX20m
(pictured below) and HFX32m/HFX48m (pictured below)
both share common housings.
Each of these units is designed to function over an extended
operating range of supply voltage, from 6 – 32 VDC.
HFX12m/HFX20m
HFX32m/HFX48m
The three integrated CAN ports on these units support CAN
2.0B .
HFX controller s are programmed via CAN via an E - COM®
adapter with either HFX service tool or FXST service tool
Both included in the installation package, see section 8 for
service tool installation instructions. A Kvaser® CAN adapter is
also compatible with the FXST service tool.
The two regulated outputs (sensor supplies) can be
con gured individually for either 5 or 10 V operation.
.
Advertisement
Table of Contents
