Danfoss ECL Comfort 210 Operating Manual page 31

Operating Guide ECL Comfort 210/296/310, application A237/A337
VI.LG.R3.02
Automatic update of controller software (firmware):
The software of the controller is updated automatically when the key
is inserted (as of controller version 1.11 (ECL 210 / 310) and version
1.58 (ECL 296)). The following animation will be shown when the
software is being updated:
Progress bar
During update:
• Do not remove the KEY
If the key is removed before the hour-glass is shown, you have
to start afresh.
• Do not disconnect the power
If the power is interrupted when the hour-glass is shown, the
controller will not work.
The "Key overview" does not inform — through ECA 30 / 31 — about
the subtypes of the application key.
Key inserted / not inserted, description:
ECL Comfort 210 / 310, controller versions lower than 1.36:
-
Take out the application key; for 20 minutes
settings can be changed.
-
Power up the controller without the
application key inserted; for 20 minutes
settings can be changed.
ECL Comfort 210 / 310, controller versions 1.36 and up:
-
Take out the application key; for 20 minutes
settings can be changed.
-
Power up the controller without the
application key inserted; settings cannot be
changed.
ECL Comfort 296 , controller versions 1.58 and up:
-
Take out the application key; for 20 minutes
settings can be changed.
-
Power up the controller without the
application key inserted; settings cannot be
changed.
© Danfoss | 2017.05 | 31