Danfoss ECL Comfort 210 Operating Manual page 45

Operating Guide ECL Comfort 210/296/310, application A237/A337
DHW circuit
Overview display 1 informs about:
actual DHW temperature, controller mode, desired DHW
temperature as well as the comfort schedule of the current day.
Overview display 2 informs about:
state of the controlled components, actual DHW temperature,
(desired DHW temperature), controller mode, return temperature
(limitation value), influence on desired DHW temperature.
Dependent on chosen display, the overview displays for the DHW
circuit inform you about:
• actual DHW temperature (50.3)
• controller mode ( )
• desired DHW temperature (50 °C)
• comfort schedule of the current day(0 - 12 - 24)
• state of the controlled components (M1, P1)
• actual DHW temperature (50 °C), (desired DHW temperature (50))
• return temperature (- - °C) (limitation temperature (30))
Setting the desired temperature
Depending on the chosen circuit and mode, it is possible to enter
all daily settings directly from the overview displays (see also the
next page concerning symbols).
Setting the desired room temperature
The desired room temperature can easily be adjusted in the
overview displays for the heating circuit.
Action: Purpose:
Desired room temperature
Confirm
Adjust the desired room temperature
Confirm
This overview display informs about outdoor temperature, actual
room temperature as well as desired room temperature.
The display example is for comfort mode. If you want to change
the desired room temperature for saving mode, choose the mode
selector and select saving.
VI.LG.R3.02
If the temperature value is displayed as
"- -" the sensor in question is not connected.
"- - -" the sensor connection is short-circuited.
Overview display 1:
Example of overview display with
Influence indication:
Examples:
20.5
21.0
Overview display 2:
© Danfoss | 2017.05 | 45