Danfoss ECL Comfort 210 Operating Manual page 125

Operating Guide ECL Comfort 210/296/310, application A237/A337
The ECL menus are as described for the ECL controller.
Most of the settings done directly in the ECL controller can be done
via the ECA 30 / 31 too.
VI.LG.R3.02
All settings can be seen even if the application key is not inserted in
the ECL controller.
For changing settings, the application key must be inserted.
The Key overview (MENU > 'Common controller settings' > 'Key
functions') does not show the applications of the key.
The ECA 30 / 31 will display this information (an X on the ECA 30 / 31
symbol) if the application in the ECL controller does not comply with
the ECA 30 / 31:
In the example 1.10 is current version and 1.42 is desired version.
Display part of ECA 30 / 31:
This display indicates that an application has not been uploaded or the
communication to the ECL controller (master) is not working properly.
An X on the ECL controller symbol indicates wrong setup of
communication addresses.
Display part of ECA 30 / 31:
Newer versions of ECA 30 / 31 indicate the address number of the
connected ECL Comfort controller.
Address number can be changed in the ECA MENU.
A stand-alone ECL Controller has the address 15.
© Danfoss | 2017.05 | 125