Danfoss ECL Comfort 210 Operating Manual page 3

Operating Guide ECL Comfort 210/296/310, application A237/A337
The Internal I/O module ECA 32 is placed in the base part for ECL
Comfort 310.
ECL Comfort 210 is available as:
• ECL Comfort 210, 230 volt a.c. (087H3020)
• ECL Comfort 210B, 230 volt a.c. (087H3030)
ECL Comfort 296 is available as:
• ECL Comfort 296, 230 volt a.c. (087H3000)
ECL Comfort 310 is available as:
• ECL Comfort 310, 230 volt a.c. (087H3040)
• ECL Comfort 310B, 230 volt a.c. (087H3050)
• ECL Comfort 310, 24 volt a.c. (087H3044)
The B-types have no display and dial. The B-types are operated by
means of the Remote Control unit ECA 30 / 31:
• ECA 30 (087H3200)
• ECA 31 (087H3201)
Base parts for ECL Comfort:
• for ECL Comfort 210, 230 volt (087H3220)
• for ECL Comfort 296, 230 volt (087H3240)
• for ECL Comfort 310, 230 volt and 24 volt (087H3230)
Additional documentation for ECL Comfort 210, 296 and 310,
modules and accessories is available on http://heating.danfoss.com/.
Documentation for ECL Portal: See http://ecl.portal.danfoss.com.
VI.LG.R3.02
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
Local legislations must be respected. This comprises also cable
dimensions and type of isolation (double isolated at 230 V).
A fuse for the ECL Comfort installation is max. 10 A typically.
The ambient temperature ranges for ECL Comfort in operation are:
ECL Comfort 210 / 310: 0 - 55 °C
ECL Comfort 296: 0 - 45 °C.
Exceeding the temperature range can result in malfunctions.
Installation must be avoided if there is a risk for condensation (dew).
The warning sign is used to emphasize special conditions that should
be taken into consideration.
© Danfoss | 2017.05 | 3