Mounting - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210/296/310, application A237/A337

2.3 Mounting

2.3.1 Mounting the ECL Comfort controller
See the Installation Guide which is delivered together with the
ECL Comfort controller.
For easy access, you should mount the ECL Comfort controller near
the system.
ECL Comfort 210 / 296 / 310 can be mounted
• on a wall
• on a DIN rail (35 mm)
ECL Comfort 296 can be mounted
• in a panel cut-out
ECL Comfort 210 can be mounted in an ECL Comfort 310 base part
(for future upgrade).
Screws, PG cable glands and rawlplugs are not supplied.
Locking the ECL Comfort 210 / 310 controller
In order to fasten the ECL Comfort controller to its base part, secure
the controller with the locking pin.
16 | © Danfoss | 2017.05
To prevent injuries to persons or the controller, the controller has to
be securely locked into the base. For this purpose, press the locking
pin into the base until a click is heard and the controller no longer
can be removed from the base.
If the controller is not securely locked into the base part, there is a risk
that the controller during operation can unlock from the base and the
base with terminals (and also the 230 V a.c. connections) are exposed.
To prevent injuries to persons, always make sure that the controller
is securely locked into its base. If this is not the case, the controller
should not be operated!
VI.LG.R3.02