Show Platform Ipv6 Unicast - Cisco catalyst 3750 Command Reference Manual

show platform ipv6 unicast

show platform ipv6 unicast
Use the show platform ipv6 unicast privileged EXEC command to display platform-dependent IPv6
unicast routing information. This command is available only if the stack is running the IP services image.
Syntax Description
adjacency
ipv6-prefix
backwalk {adjacency
| loadbalance}
compress
ipv6-prefix/prefix
length
interface
loadbalance
mpath
retry {adjacency |
route}
route
tcam
detail
statistics
table
trace
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Catalyst 3750 Switch Command Reference
C-18
show platform ipv6 unicast {adjacency [ipv6-prefix] | backwalk {adjacency | loadbalance} |
compress ipv6-prefix/prefix length | interface | loadbalance | mpath | retry {adjacency |
route} | route [ipv6-prefix/prefix length | tcam] [detail] | statistics | table [detail] | trace}
[| {begin | exclude | include} expression]
Display IPv6 adjacency information for the switch or for the specified IPv6
network.
(Optional) The IPv6 network to be displayed. This argument must be in the
form documented in RFC 2373 where the address is specified in hexadecimal
using 16-bit values between colons.
Display IPv6 backwalk information.
• adjacency—Display adjacency backwalk information.
loadbalance—Display backwalk load balance information.
•
Display IPv6 prefix compression information.
ipv6-prefix—The IPv6 network.
•
/prefix length—The length of the IPv6 network prefix. A decimal value
•
from 0 to 128 that shows how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address). A
slash mark must precede the decimal value.
Display IPv6 interface information.
Display IPv6 loadbalance information
Display IPv6 multipath information
Display IPv6 retry information.
adjacency—Display IPv6 adjacency retry information.
•
route—Display IPv6 route retry information.
•
Display IPv6 route information.
(Optional) Display the IPv6 TCAM route table information.
(Optional) Display detailed IPv6 route information.
Display IPv6 accumulated statistics.
Display IPv6 unicast table information.
Display IPv6 unicast traces.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Appendix C Catalyst 3750 Switch Show Platform Commands
OL-8552-07