Show Platform Wireless-Controller - Cisco catalyst 3750 Command Reference Manual

Hide thumbs Also See for catalyst 3750:
Table of Contents

Advertisement

show platform wireless-controller

show platform wireless-controller
Use the show platform wireless-controller privileged EXEC command to display information about
the internal wireless controller in a Catalyst 3750G Integrated Wireless LAN Controller Switch.
Syntax Description
management-info
status
summary
switch-number
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FZ
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Enter the show platform wireless-controller commands to determine the stack number of the switch or
switches in the stack that contain the integrated wireless LAN controller. The command outputs also
display the MAC address and IP address of the controller to be used in accessing and configuring the
controller.
This command applies only to the Catalyst 3750G Wireless Controller Switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 3750 Switch Command Reference
C-48
show platform wireless-controller [management-info | status | summary] [switch-number]
[ | {begin | exclude | include} expression]
(Optional) Display information about the management interface of the wireless
controller.
(Optional) Display wireless controller status information.
(Optional) Display wireless controller summary information.
(Optional) Display wireless controller information for the specified stack
member. The range is from 1 to 9.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C
Catalyst 3750 Switch Show Platform Commands
OL-8552-07

Advertisement

Table of Contents
loading

Table of Contents