Show Platform Monitor - Cisco catalyst 3750 Command Reference Manual

Appendix C Catalyst 3750 Switch Show Platform Commands

show platform monitor

Use the show platform monitor privileged EXEC command to display platform-dependent Switched
Port Analyzer (SPAN) information.
Syntax Description session
session-number
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(11)AX
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-8552-07
show platform monitor [session session-number] [ | {begin | exclude | include} expression]
(Optional) Display SPAN information for the specified SPAN session. The
range is 1 to 66.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform monitor
Catalyst 3750 Switch Command Reference
C-23