Exception Crashinfo - Cisco Catalyst 2960 Command Reference Manual

exception crashinfo

exception crashinfo
Use the exception crashinfo global configuration command to configure the switch to create the
extended crashinfo file when the Cisco IOS image fails. Use the no form of this command to disable this
feature.
Syntax Description This command has no arguments or keywords.
Defaults The switch creates the extended crashinfo file.
Command Modes
Global configuration
Command History Release
12.2(25)SED
Usage Guidelines
The basic crashinfo file includes the Cisco IOS image name and version that failed and a list of the
processor registers. The extended crashinfo file includes additional information that can help determine
the cause of the switch failure.
Use the no exception crashinfo global configuration command to configure the switch to not create the
extended crashinfo file.
Examples This example shows how to configure the switch to not create the extended crashinfo file:
Switch(config)# no exception crashinfo
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
show running-config
Catalyst 2960 Switch Command Reference
2-106
exception crashinfo
no exception crashinfo
Modification
This command was introduced.
Chapter 2
Description
Displays the operating configuration, including defined macros.
For syntax information, select Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2 > File
Management Commands > Configuration File Management
Commands.
Catalyst 2960 Switch Cisco IOS Commands
OL-8604-03