Using Operating Mode - Eaton IQ 100 series User & Installation Manual

IQ 100 Series (130/140/150) Meter
Programming the Meter Using the Front Panel

Using Operating Mode

Operating Mode is the IQ 100 Series meter's default mode, that is, the standard front panel display.
After Startup, the meter automatically scrolls through the parameter screens, if scrolling is enabled.
Each parameter is shown for 7 seconds, with a 1 second pause between parameters. Scrolling is sus-
pended for 3 minutes after any button is pressed.
1. Press the Down button to scroll all the parameters in Operating Mode. The currently "Active," i.e.,
displayed, parameter has the Indicator light next to it, on the right face of the meter.
2. Press the Right button to view additional readings for that parameter. The table below shows possible
readings for Operating Mode. Sheet 2 in
NOTE: Readings or groups of readings are skipped if not applicable to the meter type or hookup, or if
they are disabled in the programmable settings.
OPERATING MODE PARAMETER READINGS
POSSIBLE READINGS
VOLTS L-N
VOLTS L-L
AMPS
W/VAR/PF
VA/Hz
Wh
VARh
VAh
52 User and Installation Manual IM02601003E-July 2010 www.eaton.com
Appendix A
VOLTS_LN VOLTS_LN_
MAX
VOLTS_LL VOLTS_LL_
MAX
AMPS AMPS_NEU-
TRAL
W_VAR_PF W_VAR_PF_
MAX_POS
VA_FREQ VA_FREQ_
MAX
KWH_REC KWH_DEL
KVARH_POS KVARH_
NEG
KVAH
shows the Operating Mode Navigation Map.
VOLTS_LN_
MIN
VOLTS_LL_
MIN
AMPS_MAX AMPS_MIN
W_VAR_PF_ W_VAR_PF_
MIN_POS MIN_NEG
VA_FREQ_
MIN
KWH_NET KWH_TOT
KVARH_NET KVARH_
TOT