Table of Contents
Advertisement
IQ 100 Series (130/140/150) Meter
Programming the IQ 100 Series Using Software
Accessing the IQ 100 Series Device Profile
Click the Profile icon in the Title Bar.
1.
2. You will see the IQ 100 Device Profile screen. The tabs
at the top of the screen allow you to navigate between
Settings screens. The Buttons at the bottom of the screen allowyou to perform tasks, for
example, updating the Device Profile. See the example screen below.
.
Tabs
Settings Screen
Buttons
3. To select a setting, click on its tab at the top of the screen. This causes the Settings screen to be
displayed. See the following sections for instructions for configuring meter settings.
56
User and Installation Manual IM02601003E-July 2010 www.eaton.com
Advertisement
Table of Contents
