Configuring The Scroll Feature - Eaton IQ 100 series User & Installation Manual

IQ 100 Series (130/140/150) Meter
Programming the Meter Using the Front Panel

Configuring the Scroll Feature

When in Auto Scroll mode, the meter performs a scrolling display, showing each parameter for 7
seconds, with a 1 second pause between parameters. The parameters that the meter displays are
determined by the following conditions:
• They have been selected through software. (Refer to the chapter beginning on page 53 for
instructions.)
• Your meter model (IQ130/140 or 150).
To enable or disable Auto-scrolling:
1. Press the Enter button when SCrl is in the A window.
The Scroll YES screen appears.
2. Press either the Right or Down button if you want to access the
Scroll no screen.
To return to the Scoll YES screen, press either button.
3. Press the Enter button on either the Scroll YES screen (to enable auto-scrolling) or the Scroll no
screen (to disable auto-scrolling).
The CT- n screen appears (this is the next Configuration mode parameter).
NOTE:
• To exit the screen without changing scrolling options, press the Menu button.
• To return to the Main Menu screen, press the Menu button twice.
• To return to the scrolling (or non-scrolling) parameters display, press the Menu button three times.
48 User and Installation Manual IM02601003E-July 2010 www.eaton.com