Service: Current Only Measurement (Three Phase) - Eaton IQ 100 series User & Installation Manual

8. Service: Current Only Measurement (Three Phase)

* Even if the meter is used for only amp readings, the unit requires a
Voltage reference.
Please make sure that the voltage input is attached to the meter.
AC Control Power can be used to provide the Reference Signal.
Select: "3 EL WYE" (3 Element Wye) in Meter
Programming setup.
User and Installation Manual IM02601003E - July 2010 www.eaton.com
IQ 100 Series ((130/140/150) Meter
Electrical Installation
35