Using The Iq 100 Series Tools Menu; Accessing The Device Profile Screen; Reset Device Information; Retrieve Device Status - Eaton IQ 100 series User & Installation Manual

Hide thumbs Also See for IQ 100 series:

Table of Contents

IQ 100 Series ((130/140/150) Meter

Programming the IQ 100 Series Meter Using Software

Using the IQ 100 Series Tools Menu

The Tools Menu allows you to access specific functions

for the IQ 100 Series Meter. Click Tools from the Title Bar

to display the Tools Menu.

Click the first option, Edit Current Device Profile, to open

the Device Profile screen. This menu option performs the

same function as clicking the Profile icon in the Title Bar.

Click this option to reset either Max/Min values (IQ 130, IQ 140,

and IQ 150 meters) and/or Energy Accumulators (IQ 150 only).

You will see the screen shown on the right. Click the checkbox

next to the item(s) you want to reset.

Click this option to see the Device status screen for the meter. this is the same screen that displays

when you first connect to the meter.

Click this option to upgrade the meter's firmware. You will

see the screen on the right.

Click Browse to locate the flash file.

Click OK to update the firmware with the flash file. When

flashing is complete, click Exit to close the screen.

NOTE: Flash updating of firmware can only be done at a Baud

Rate of 57.6k.

User and Installation Manual IM02601003E - July 2010 www.eaton.com

Table of Contents