Using Configuration Mode - Eaton IQ 100 series User & Installation Manual

Using Configuration Mode

Configuration Mode follows Reset: Energy on the Main Menu.
To access Configuration Mode:
1. Press the Menu button while the meter is auto-scrolling parameters.
2. Press the Down button until the Configuration Mode option (CFG) is in the A window.
3. Press the Enter button. The Configuration Parameters screen appears.
4. Press the Down button to scroll through the configuration parameters: Scroll (SCrL), CT, PT,
Connection (Cnct) and Port. The parameter currently 'Active," i.e., configurable, flashes in the A
window.
5. Press the Enter button to access the Setting screen for the currently active parameter.
NOTE: You can use the Enter button to scroll through all of the Configuration parameters and their
Setting screens, in order.
Press Enter when CFG is in A window -
6. The parameter screen appears, showing the current settings. To change the settings:
• Use either the Down button or the Right button to select an option.
• To enter a number value, use the Down button to select the number value for a digit and the Right
button to move to the next digit.
NOTE: When you try to change the current setting and Password Protection is enabled for the
meter, the Password screen appears. See the previous page for instructions on entering a password.
7. Once you have entered the new setting, press the Menu button twice.
8. The Store ALL YES screen appears. You can either:
• Press the Enter button to save the new setting.
• Press the Right button to access the Store ALL no screen; then press the Enter button to cancel
the Save.
9. If you have saved the settings, the Store ALL done screen appears and the meter resets.
Press the Enter button to save the settings Press the Enter button to
Press the Right button for Stor All no screen
Press Enter when Parameter you want is in A window
Cancel the save
User and Installation Manual IM02601003E - July 2010 www.eaton.com
IQ 100 Series ((130/140/150) Meter
Programming the Meter Using the Front Panel
Parameter screen appears - Press Down-
The settings have been saved
47