Performing Device Profile Tasks - Eaton IQ 100 series User & Installation Manual

Performing Device Profile Tasks

You can perform the following tasks using the Device Profile screen Buttons.
• Update: Click to send the current settings to the meter.
NOTE: You must click the Update Device button after making changes to the Settings screens, if you
want to update the connected meter's settings.
• Cancel: Click to leave the Device Profile Editor without
saving any changes.
• Load: Click to load a previously saved Device Profile
Settings file. You will see the Load Programmable Settings
window, shown on the right.
Select the saved Device Profile you want and click Open.
The settings from that file will now appear in the Settings
screens; for example, the CT and PT Ratios will be those
from the saved Device Profile, rather than from the
currently connected meter.
• Save: Click to save the Device Profile settings to a file. You
will see the Save Programmable Settings window, shown on
the right. Give a name to the Device Profile and click Save.
• Report: Click to open a Notepad window containing the
Device Profile settings in a text file. See the example
window, shown on the right.
• Print the text file by selecting File>Print from the
Notepad Title Bar.
• Save the text file by selecting File>Save from the
Notepad Title Bar.
NOTE: When you click Report, you will be given the
choice of viewing the Device Profile report or printing the
report without viewing it on the screen.
·
User and Installation Manual IM02601003E - July 2010 www.eaton.com
IQ 100 Series ((130/140/150) Meter
Programming the IQ 100 Series Meter Using Software
57