Din Installation Steps - Eaton IQ 100 series User & Installation Manual

DIN Installation Steps

Meter with NEMA 12 Mounting Gasket
1. Slide meter with NEMA 12 Mounting Gasket into panel. (Remove ANSI Studs, if in place.)
2. From back of panel, slide 2 DIN Mounting Brackets into grooves in top and bottom of
meter housing. Snap into place.
3. Secure meter to panel with lock washer and a #8 screw through each of the 2 mounting
brackets. Tighten with a #2 Phillips screwdriver. Do not overtighten.
Remove (unscrew) ANSI studs for
DIN Installation
User and Installation Manual IM02601003E - July 2010 www.eaton.com
DIN Mounting Bracket
Top Mounting Bracket Groove
Bottom Mounting Bracket Groove
#8 Screw
IQ 100 Series ((130/140/150) Meter
Mechanical Installation
19