Poll Phasors - Eaton IQ 100 series User & Installation Manual

Poll Phasors

Click Real Time Poll>Power Quality and Alarms>Phasors. You will see the screen shown below.
The Phasors screen displays the Phase relationships of the currently connected meter. If you have an
auxiliary voltage reading (i.e. generator and bus where the V Aux is the generator), Aux box and the V
Aux phaser are displayed. The V Aux phasor is referenced to V A phase.
To adjust the Phasor display, click Options at the bottom of the screen.
You will see the screen shown on the right.
a. In the Display Angles Increasing and Phasor Rotation boxes,
select either Clockwise or Counter Clockwise.
b. From the pull-down menu at the bottom of the screen, select
Vectors, Triangles or Vectors and Triangles to change the
graphic representation of the data.
Click OK to save your selections and return to the Phasors screen.
• Click Copy to save a copy of the screen to the clipboard.
• Click Print to send a copy of the graph to a printer.
• Click Help to view instructions for this screen.
• Click OK to return to the main screen.
User and Installation Manual IM02601003E - July 2010 www.eaton.com
IQ 100 Series ((130/140/150) Meter
Programming the IQ 100 Series Meter Using Software
63