Wall Mounting; Mounting Dimensions (Outline Dimensions + Drill Patterns); Mounting Torque Requirements - Siemens SINAMICS V10 Operating Instructions Manual

5.1.2

Wall mounting

What does "Wall mounting" mean?
The term "Wall mounting" means:
1. The inverter mounts directly to a cabinet wall, without use of optional mounting kit.
2. The entire inverter including its heatsink mounts inside the cabinet.
3. You don't need an external fan to cool the inverter.

Mounting dimensions (outline dimensions + drill patterns)

You can drill holes in cabinet wall according to the drill patterns shown below. The inverter
outline dimensions are also provided in the figure for your reference:
155
138
203.11
186
Figure 5-4 Mounting dimensions (in mm)
Table 5-2

Mounting torque requirements

Inverter variant
Frame Size A
Frame Size B
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
140
114
218
192.5
Holes to be drilled in cabinet
wall
4
4
159 150
142
223 260
210
Fixing method
4 x M5 screws and nuts
4 x M5 screws and nuts
Installation
5.1 Mechanical installation
124
230
Tightening torque
(Nm)
2.5
2.5
23