Mounting Sequence - Siemens SINAMICS V10 Operating Instructions Manual

Installation
5.1 Mechanical installation
Inverter variant
Frame Size C
Frame Size D

Mounting sequence

Proceed the following procedure to complete your mounting of the inverter directly to cabinet
wall:
Mounting screws
Figure 5-5
24
Holes to be drilled in cabinet
wall
4
4
1
1. Drill 4 holes in cabinet wall
Mounting
holes
Mounting sequence (wall mounting)
Fixing method
4 x M6 screws and nuts
4 x M8 screws and nuts
Cabinet wall
Mounting holes
2
2. Mount the inverter to the wall and fix it with supplied
mounting screws and screw nuts.
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
Tightening torque
(Nm)
2.5
2.5
Screw
nuts
SINAMICS V10