Mechanical Installation; Mounting Orientation And Clearance - Siemens SINAMICS V10 Operating Instructions Manual

Installation
5.1

Mechanical installation

5.1.1

Mounting orientation and clearance

Depending on the mounting method selected, you MUST mount the inverter vertically
● in a cabinet or
● in a cabinet, but with the inverter heasink extending outside the cabinet.
Do NOT mount the inverter horizontally in the cabinet.
Mounting orientation
Figure 5-1
When performing vertical mounting, you can mount the inverter with an angle of 87° to 90°
between inverter and horizontal surface. See figure below for details:
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
WARNING
Mounting orientation
5
21