Siemens SINAMICS V10 Operating Instructions Manual page 32

Installation
5.1 Mechanical installation
Mounting the operator panel to cabinet door
Proceed the following procedure to mount the operator panel to cabinet door:
1
Figure 5-11
Note
For the cable connection between the operator panel and the inverter body unit, see topic
"Interface definition (Page 33)".
32
3
Front view
Procedure for mounting the operator panel to cabinet door
2
4
Door cut-out
Rear view
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
Cabient door
4 x M3 mounting screws
and washers
(Tightening torque: 0.8 Nm)
SINAMICS V10