Removing The Fans From Frame Size C - Siemens SINAMICS V10 Operating Instructions Manual

Replacing the fans

Removing the fans from Frame Size C

Follow the steps described in the figure to remove the fans from Frame Size C:
Frame Size C
Connector on fans
Figure A-2
120
Connector on inverter housing
Metal spacers
Fan
Removing the fans from Frame Size C
Connector on inverter housing
Remove the fan cover with fans inside from the
inverter by manually detaching connectors on the
fans from the mating connectors on the housing.
Pull the fans out of the fan cover.
Fan
Connector on fans
Fan cover
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
4 M4 mounting screws
(Tightening torque: 0.8 Nm)
Remove the mounting
screws from the fan cover.
Pull the metal spaces out of the fans.
SINAMICS V10