Securing The Centrifuge To The Floor; Using J2 Series Rotors In The Avanti J - Beckman Coulter Avanti J-25 Instruction Manual

Specifications and Preinstallation Requirements

SECURING THE CENTRIFUGE TO THE FLOOR

USING J2 SERIES ROTORS IN THE AVANTI J

1-12
!
WARNING
Do not place the centrifuge near areas
containing flammable reagents or
combustible fluids. Vapors from these
materials could enter the instrument's air
system and be ignited.
Avanti J series centrifuges are certified to meet the requirements of
the European CE mark. To meet these requirements, the centrifuge
must be secured to the floor using the anchoring hardware shipped
with the instrument. This will prevent the centrifuge from moving in
the unlikely event of a rotor mishap.
Complete instructions for installing the anchoring kit are packaged
with the hardware, which is shipped with the centrifuge. The instruc-
tions (publication J325-TB-003) include a full-size template to be
used as a guide for drilling holes in the floor. Refer to this document
for additional installation instructions.
➠
NOTE
Beckman Coulter representatives are not
equipped to drill holes in your floor. The holes
must be drilled before your scheduled
installation.
!
CAUTION
Do not use the Beckman Coulter JA-10, JS-7.5,
JA-14, or JS-13 rotors in the Avanti J-25I
centrifuge before reading this information.