Limiting by Using a MAC Address (MAC Address
Filtering)
You can control access to the machine by using a MAC address. You can allow for or reject
access from a specified MAC address.
Note
Be sure to specify the correct MAC address. An incorrect entry of a MAC address does not allow
for access to the machine from a network.
1.
Open the Web page of this machine.
How to login to the Web page
Checking or Changing the Settings of This Machine from a Computer
2.
Log in as the administrator.
3.
Select [Admin Setup].
4.
Select [Network] > [Security] > [MAC Address Filtering].
5.
Specify detailed settings by following the on-screen instructions.
Note
If nothing is registered in [Administrator's MAC Address to Register], access to the
machine may not be allowed depending on the specified MAC address.
If you use a proxy server, [Your Current Local Host/Proxy MAC Address] and the MAC
address of your host may not match.
6.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
Memo
You cannot specify to accept or to reject for each address.
1153