Table of Contents
Advertisement
Setting the Reception Protocol
You can set reception protocol (POP3, SMTP, etc.) so that the machine can receive e-mail.
1.
Open a Web browser.
2.
Enter "http://(The IP address of this machine)" in the address bar,
and then press the <Enter> key.
3.
Click [Administrator Login].
4.
Enter "admin" in [User Name] and the administrator password of
the machine in [Password], and then click [OK].
For Mac OS X, enter "admin" in [Name] and the administrator password of the
machine in [Password], and then click [Login].
5.
Click [SKIP].
6.
Click [Admin Setup] at the top of the screen.
7.
Click [Network] > [Mail Server] on the left side of the screen.
8.
Set the mail server based on the information on the setting
information sheet if necessary.
9.
Click [Submit].
10.
Click [E-mail] > [Receive Settings] on the left side of the screen.
11.
Select [POP3], and then click [To STEP2].
12.
Set the POP3 protocol if necessary.
13.
Click [Submit].
1165
Advertisement
Table of Contents
