Adjusting Brightness Of The Touch Panel - Oki MC573 Advanced Manual

Adjusting Brightness of the Touch Panel

To change the brightness of the touch panel on the operator panel, perform the procedure
below.
You can adjust the brightness of screen during operation and in the Power Save mode
respectively.
1
Press [Device Settings] on the touch panel.
2
Press or several times, and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press or several times, and press [Manage Unit].
5
Press [System Setup].
6
Press or several times, and press [Panel Brightness During Operating]
or [Panel Brightness While Power Save].
7
Enter value and press [OK].
Available values are from 1 to 7. The bigger the number is, the brighter the screen gets.
- 13 -
1. Basic Operations