18. MR-J4W2-0303B6 SERVO AMPLIFIER
(2) When you do not use the forced stop deceleration function
The timing chart that shows the servo motor condition when an alarm or SSCNETIII/H communication shut-
off occurs is the same as (1) (b) of this section.
18.3.9 Interfaces
The items in the following table are the same as those for MR-J4W2-_B and MR-J4W3-_B servo amplifiers.
Refer to the section of the detailed explanation field for details.
POINT
To disable the function, set "0 _ _ _" in [Pr. PA04].
Detailed description of interfaces (excluding analog
output)
Source I/O interface
Item
18 - 36
Detailed explanation
Section 3.8.2
Section 3.8.3