Mitsubishi Electric MR-J4W2 Instruction Manual page 525

APPENDIX
App. 9 SSCNET III cable (SC-J3BUS_M-C) manufactured by Mitsubishi Electric System &
Service
The cable is available per 1 m up to 100 m. The number of the length (1 to 100) will be in the underscore
in the cable model.
App. 10 CNP_crimping connector
No. Name
1) Connector set MR-J3WCNP12-DM
2) Connector set MR-J3WCNP12-DM-
10P
POINT
For the details of the SSCNET III cables, contact your local sales office.
Do not look directly at the light generated from CN1A/CN1B connector of servo
amplifier or the end of SSCNET III cable. The light can be a discomfort when it
enters the eye.
Cable model
SC-J3BUS_M-C
1) 2)
CNP1
CNP2
Model
For CNP1
Receptacle housing:
J43FSS-03V-KX
Receptacle contact:
BJ4F-71GF-M3.0
(JST)
Applicable wire
Wire size: 1.25 mm
(AWG 16 to 14)
Insulator OD: 2.0 mm to 3.8 mm
The crimping tool (YRF-1130) is
required.
Cable length
Bending life
1 m to 100 m
Ultra-long
1 to 100
bending life
Definition
For CNP2
Receptacle housing:
F32FMS-06V-KXY
Receptacle contact:
BF3F-71GF-P2.0
(JST)
Applicable wire
Wire size: 1.25 mm
2 2
to 2.0 mm
Insulator OD: 2.4 mm to 3.4 mm
The crimping tool (YRF-1070) is
required.
App. - 42
Application/remark
Using long distance
cable
Number of
1 each
10 each
2 2
to 2.0 mm
(AWG 16 to 14)
parts