ABB ControlMaster CM10 User Manual page 97

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Diagnostics
Source Analysis
Analog Sources
Analog Source
View Value
Digital Sources
Digital Source
View State
Invalid Sources
IM/CM/S–EN Rev. R
1 1 1
/ , / and / DIN
8 4 2
Enables the current value of any analog source to be viewed.
Selects the analog signal to be viewed – see Section A.2, page 117.
Displays the value of the analog signal selected.
Enables the current state of any digital source to be viewed.
Selects the digital signal to be viewed – see Section A.1, page 116.
Displays the state of the digital signal selected.
Select edit to display any invalid analog or digital sources that are used in the configuration.
Reasons for invalid sources include:

Hardware not fitted

Software not fitted

Digital I/O configured as wrong type

Alarms not configured

Math, logic, timer or custom linearizer not configured
7 Advanced Level
95