ABB ControlMaster CM10 User Manual page 50

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Input/Output / ... ...Analog Outputs
Elect. Low*
Elect. High*
Auto Eng Range*
Eng Low*
Eng High*
Polarity**
*Not applicable if Output Type is Digital or Source is None.
**Not applicable if Output Type is Analog or Source is None.
48
1 1 1
/ , / and / DIN
8 4 2
The current output required when the source value is equal to the Eng Low value – see page
45.
The current output required when the source value is equal to the Eng High value – see page
45.
If enabled (On) the Eng High and Eng Low values for the output are set to the engineering
range values of the source automatically.
The minimum engineering range output value.
The maximum engineering range output value.
Sets the polarity of the output signal.
If set to Negative, the output is energized when the source is inactive.
If set to Positive, the output is energized when the source is active.
7 Advanced Level
IM/CM/S–EN Rev. R