ABB ControlMaster CM10 User Manual page 62

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Control / ...Loop 1 Output
Slew Rate
Function
Off
Up and Down
Up
Down
Rate
Disable Source
60
1 1 1
/ , / and / DIN
8 4 2
The (output) Slew Rate restricts the maximum rate of change of the
control output.
Selects if the output Slew Rate function is enabled and when it applies.
The Slew Rate applies to increasing and decreasing output values.
The Slew Rate applies to increasing output values.
The Slew Rate applies to decreasing output values only.
The maximum rate of change of the control output (as % / s).
The (level-triggered) source required to disable Slew Rate
control of the output. This source is level-triggered.
7 Advanced Level
Disabled
Enabled
Enabled
IM/CM/S–EN Rev. R