ABB ControlMaster CM10 User Manual page 58

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Control
Loop 1 Output
Limits
Limit Action
Low/High Limit
Failure Actions
Power Recovery
Last Mode
Man – Last
Man – 0 %
Man – 100 %
56
1 1 1
/ , / and / DIN
8 4 2
Used to set the output limits, tracking rates, slew rates and output action on power failure or
process variable failure.
Note. When used with split output the limits restrict the PID algorithm output (see page 30) before
the split output range values are calculated.
Selects when the output limits should be applied (Off, Auto + Manual, Auto Only).
Sets minimum / maximum controller output in %.
Used to select the default power failure mode required following a power interruption or failure.
The last Power Recovery mode selected.
Manual control mode using the last output before power failure.
Manual control mode with output set to 0 %.
Manual control mode with output set to 100 %.
7 Advanced Level
IM/CM/S–EN Rev. R