ABB ControlMaster CM10 User Manual page 43

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Display / ...Operator Functions
Auto Manual Enable
Local Remote Enable
Alarm Ack. Enable
SP Adjust Enable
Settings
Brightness
Contrast
Date & Time
Date Format
Time & Date
Daylight Saving
IM/CM/S–EN Rev. R
1 1 1
/ , / and / DIN
8 4 2
Turns on / off the ability for Auto and Manual control mode to be changed in Operator Level.
Turns on / off the ability for Local and Remote setpoint mode to be changed in Operator
Level.
Turns on / off the ability to acknowledge alarms from the front panel.
Turns on / off setpoint adjustment in the Operator Level.
Adjusts display settings to suit ambient conditions.
Increases / Decreases the display brightness to suit local environmental conditions.
Increases / Decreases the display contrast to suit local environmental conditions.
Note. Enabled for CM30 and CM50 only.
Sets the date format, local time and date and daylight saving start / end times.
Selected from: DD–MM–YYYY, MM–DD–YYYY, YYYY–MM–DD.
Sets the controller's time and date.
Sets daylight saving parameters.
7 Advanced Level
41