ABB ControlMaster CM10 User Manual page 44

ControlMaster CM10, CM30 and CM50
Universal process controllers,
...Display / ...Date & Time / ...Daylight Saving
DS Region
Off
Europe
USA
Custom
DS Start Time
DS Start Occur
DS End Occur
DS Start Day
DS End Day
DS Start Month
DS End Month
42
1 1 1
/ , / and / DIN
8 4 2
Daylight saving is disabled.
Standard daylight saving start and end times are selected for Europe automatically.
Standard daylight saving start and end times are selected for USA automatically.
Used to create custom daylight saving start and end times manually for regions other than
Europe or USA.
Note. Enables Daylight Start Time and Daylight End Time parameters.
The start time selected from 1-hour increments.
Note. Displayed only when the DS Region sub-parameter is Custom.
The day within the month that daylight starts / ends – for example, to set daylight saving to
start (or end) on the second Monday of the selected month, select Second.
The day of the month daylight saving starts / ends.
Note. The Daylight Start / End Occur parameters must be valid within the month for the
selected day.
The month daylight saving starts / ends.
7 Advanced Level
IM/CM/S–EN Rev. R