Mm312 Dcp Media Module; Mm712 Dcp Media Module; Mm717 Dcp Media Module - Avaya G250 Overview

Optional components
The MM716 also supports:
Three ringer loads, which is the ringer equivalency number for up to 2,000 feet (610
●
meters) for all 24 ports
Up to 24 simultaneously-ringing ports
●
Type 1 caller ID and Type 2 caller ID
●
Ring voltage generation for a variety of international frequencies and cadences
●
The MM716 is compatible with Avaya CM version 2.0 and higher, and G350 firmware version
25.0.0 and higher.

MM312 DCP media module

The MM312 DCP media module provides 24 Digital Communications Protocol (DCP) ports with
RJ-45 jacks. The MM312 supports simultaneous operation of all 24 ports. Each port can be
connected to a two-wire DCP telephone. See
of compatible DCP telephones.
The MM312 does not support four-wire DCP telephones.
Figure 10: The MM312 media module

MM712 DCP media module

The MM712 DCP media module provides eight DCP telephone ports. The ports support
two-wire Digital Communications Protocol (DCP) telephones. See
Avaya products
Figure 11: The MM712 media module

MM717 DCP media module

The MM717 DCP media module provides 24 DCP ports of two-wire DCP functionality exposed
as a single 25-pair amphenol connector. The DCP ports are exposed by connecting the module
via a standard amphenol cable to a punch-down block with RJ-11 jacks. The MM717 allows you
to use one of the smaller media module slots for a large number of DCP telephones.
30 Overview for the Avaya G250 and Avaya G350 Media Gateways
for a list of compatible DCP telephones.
Appendix B: Supported Avaya products
Appendix B: Supported
for a list