The Front Panel Of The Avaya Mm340 Media Module; Mm340 Ports; Mm340 Leds - Avaya G250 Installing And Upgrading

Front panel description
In addition, the front panel of the S8300 has a LED labeled OK TO REMOVE, which is
connected to a button labeled SHUT DOWN. This LED indicates that the S8300 has been shut
down, and can be removed from the G250 chassis. Do not attempt to remove the S8300 without
instructions from a specially trained technician.

The front panel of the Avaya MM340 media module

The MM340 media module provides one WAN access port for the connection of an E1 or T1
WAN line.
Figure 22: The MM340 media module front panel

MM340 ports

The MM340's E1/T1 WAN access port is marked E1/T1. This port is located in the center of the
front panel.

MM340 LEDs

Table 24: MM340 LEDs
LED
ALM
TST
ACT
SIG
118 Installing and Upgrading the Avaya G250 Media Gateway
Name Color Meaning
Alarm Red The module type is not the type configured in
the MSG for the slot
Test Green A port is being initialized or a loopback is
present
Activity Yellow At least one PPP/Frame Relay session is
active
Signal Green The physical connection is up