The Front Panel Of The Avaya Mm717 Media Module - Avaya G430 Deploying And Upgrading

The front panel of the Avaya MM717 media module

The MM717 high density DCP media module front panel has a 25-pair amphenol connector
supporting 24 Digital Communications Protocol (DCP) ports. To use the MM717 media module,
connect an amphenol cable to the port and to either a breakout box or a punch down block
containing RJ-45 or RJ-11 jacks, as needed. You can attach up to 24 two-wire DCP telephones to
these jacks. The MM717 does not support four-wire DCP telephones.
Figure 39: The MM717 media module front panel
MM717 ports
The MM717 contains a single 25-pair amphenol connector, which can be connected by an
amphenol cable to a breakout box or punch down block containing RJ-45 or RJ-11 jacks, as
needed.
Table 21: 25-pair amphenol connector pinout
Station port
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
July 2018
Cable pair
White
White
White
White
White
Red
Red
Red
Red
Red
Black
Black
Black
Black
Black
Yellow
Yellow
Deploying and Upgrading Avaya G430 Branch Gateway
Comments on this document? infodev@avaya.com
Front panel description
Blue
Orange
Green
Brown
Slate
Blue
Orange
Green
Brown
Slate
Blue
Orange
Green
Brown
Slate
Blue
Orange
Table continues...
115