Mitsubishi RC-EX3 User Manual page 32

Flap❷ Swing range
Right limit setting
Select the right limit and tap [Set].
Flap❷ Swing range
Do you want to set the
range of flap motion?
If yes, tap [Yes].
Tap [Back] for resetting.
Flap❷ setting is completed
Setting the range of flap❷
motion is complete.
Do you want to set other flaps?
Yes
Tap [No] to return to top screen.
9
Select one of the right limit positions from 1 to 5 for the flap
motion range.
The range of motion between the left and right limit positions will be
displayed in black.
After you select the range, tap the
Set
Back
10
Acknowledge screen for the flap motion range is displayed.
Yes
Back
11
Acknowledge screen for the completion of setting is displayed.
To change other flap motion ranges, tap the Yes button. (☞3)
To terminate the setting, tap the
returns to the TOP screen.
No
Advice
When the unit is installed within 50 cm from a wall, it is recommended that you change
the range of the left/right flap motion as follows:
・ When installed at the right end of the wall
Left/right flap motion range
・ When installed at the left end of the wall
Left/right flap motion range
to
1 4
to
2 5
－ 30 －
button.
Set
No button. The display
Installed at Installed at
the left end the right end