Mitsubishi RC-EX3 User Manual page 45

Weekly timer
1
Mon Tue Wed Thu Fri
2
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
All Disable
Select the day of the week.
3
Weekly timer
Weekdays
State Type Time Mode Fan
Enable ON 11:00 AM
Enable
ON 0:00 AM
Enable
0:00 AM
OFF
Enable ON 0:00 AM
1
Change Enter Next
Select a line & tap [Change].
2
Weekly timer
Weekdays:No.1
State
Enable
Type
ON
1
Set
Next
2
Tap ▲▼ to set clock time & tap [Set].
3
When a desired day of the week ① is tapped on the display,
contents of current setting for the day are displayed. (☞5)
4
For the holiday setting, tap the block ② under the day to switch
Sat Sun
between " " (the holiday setting) and "(Blank)" (reset).
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
Back
■To enable the timer on the day set as holiday, it is necessary to reset the holiday
setting.
When tapping ③ "All Disable" button, the timer does not operate on
all days of the week.
When the timer is used, be sure not to set "All Disable".
5
Screen to check contents of current setting is displayed.
When the contents are changed or new setting is added, select a ①
setting line No. and tap the ② Change button.
Temp
Auto Auto
Back
6
Detail setting screen for the timer setting contents is displayed.
① Tap the State button to switch between "State Enable" and
"State Disable".
AM
② Tap the Type button to switch between the "OFF timer" and
the "ON timer".
3
③ Select a desired time (at 5-min intervals) with the
Back
④ In case of "ON timer" when the Next button is tapped,
operating conditions at the start of operation can be set. (☞7)
▲ ▼
buttons.
－ 43 －