Change The Fan Speed; F1/F2 Switch Operation; F1, F2 Switch Operation - Mitsubishi RC-EX3 User Manual

Change the fan speed

16 ： 14 (Mon)
Cooling
Set temp
Timer
Now stopping.
F1: High power F2: Energy-saving

Change the fan speed

R/C Room Outdoor
Select the fan speed.

F1/F2 switch operation

You can set any of the following functions to the F1 and F2 switches.
The F1 / F2 switches act as shortcuts; it can be much easier and faster than starting an operation from the
usual Menu on the TOP screen.
・High power operation
・Energy-saving operation
・Silent mode control
・Home leave mode
・Favorite setting operation
・Filter sign reset
Changing the function of the F1 or F2 switch can be performed with the F1/F2 function setting (☞page 63).
The following functions are set as factory settings.
You may change these settings as desired.
F1 switch ...High power operation
F2 switch ...Energy-saving operation
1
Tap the Change the fan speed button on the TOP screen.
Menu
Direction
2
When the Change the fan speed screen is displayed, tap the button
of desired fan speed.
After setting the fan speed, the display returns to the TOP screen.
■Fan speeds which can be set vary depending on the models of IU.
■When the
Auto
Back
...☞page 14
...☞page 15
...☞page 64
...☞page 46
...☞page 50
...☞page 65
Auto is selected, the fan speed is changed automatically
depending on the capacity.
Note that Auto is not displayed and cannot be set when SC-SL2 or SC-
SL3 is connected.
－ 13 －