Administrator Settings - Mitsubishi RC-EX3 User Manual

Setting and display items
Filter Filter sign reset
User setting Initial settings
Administrator
settings
Administrator password
Contact company & Error display
It is necessary to input the administrator password for menu items indicated with
Reset the filter sign.
Set next cleaning date.
Clock setting
Set and correct the current date and time.
■When the power supply is interrupted for 80 hours or less,
the clock continues to operate with the built-in backup
batteries.
If it is interrupted for more than 80 hours, it is necessary to
renew the setting.
Date & time display
Set whether the date and time are displayed or not, and
select 12H or 24H and AM or PM position.
Summer time
Current time is advanced or delayed by 1 hour.
Contrast
Contrast of LCD can be adjusted.
Backlight
Select whether the backlight is used or not, and set the
lighting time.
Controller sound
Select whether the controller sound is actuated at the touch
panel operation or not.
Operation lamp
Adjust operation lamp luminance.
luminance
■ Set the permission/prohibition for each of following
Permission/
operations:
Prohibition setting
[Run/Stop] [Change set temp] [Operation mode]
[Change flap direction]
[Change the fan speed] [High power operation] [Energy-
saving operation] [Timer]
■Set the administrator password request during operation.
[Individual flap control]
[Weekly timer] [Select the language]
[Filter sign reset]
Outdoor unit silent
The period of time to operate the unit by prioritizing the
quietness can be set.
mode timer
■ Starting and stopping times can be set for the silent mode
operation.
■ The time can be set at 5-minute intervals.
Setting temp range
Restrict the setting range of temperature.
■Temperature range can be restricted depending on operation
modes.
Temp increment
Set the interval for setting temperature (0.5°C/1.0°C).
setting
Set temp display
Set temperature display method can be selected.
R/C display setting
Register the names of remote control and indoor unit.
Set Yes or No for the need of indoor temperature display.
Set Yes or No for the need for the display of error code, heating
standby, defrosting operation on and automatic cooling/heating.
Change
administrator
Change the administrator password.
password
F1/F2 function
Set the functions of F1 and F2 switch.
Available functions:
setting
[High power operation] [Energy-saving operation] [Silent
mode cont.] [Home leave mode] [Favorite set 1] [Favorite
set 2] [Filter sign reset]
Address of the service contact is displayed.
Administrator password
－ 17 －
Details
page 65
page 33
page 34
page 35
page 35
page 36
page 36
page 37
page 52
page 53
page 54
page 56
page 56
page 57
page 62
page 63
page 68