Change Flap Direction; Change Flap Direction - Mitsubishi RC-EX3 User Manual

Change set temp
R/C Room Outdoor
▲▼
Tap to set temp & tap [Set].
Change flap direction
16 ： 14 (Mon)
Cooling
Set temp
Timer
Now stopping.
F1: High power F2: Energy-saving
Change flap direction
R/C Room Outdoor
Select the flap direction.
2
3
Auto
Set
■For allowable temperature setting ranges, refer to the range setting of set temp (☞
page 54).
Back
■Reference set temp
Cooling ... 26 to 28°C
Dry
Heating ... 20 to 24°C
Fan
■If the Auto is selected for the set temp, the set temp display shows "0".
Temperature can be adjusted higher or lower with using ▲
that Auto is not displayed and cannot be set when SC-SL2, SC-SL3, or SC-SL4
is connected.
■If the
set temp is invalidated and the display returns to the TOP screen.
1
Menu
Direction
2
Ind. flap
Control
Auto swing
Back
When the Change set temp screen is displayed, select the
temperature as desired with using
After selecting the set temp, tap the
returns to the TOP screen.
... 24 to 26°C
... Setting temp is not required.
Back button is tapped without tapping the
Tap the Change flap direction button on the TOP screen.
When an FDK with a left/right flap is not connected:
When one or more FDKs with a left/right flap are connected:
When the Change flap direction screen is displayed, tap the button
of desired flap direction.
To swing the flap, tap the Auto swing button.
To fix the flap position, tap one of 1 to 4 buttons.
After selecting the flap direction,
When an FDK with a left/ right flap is not connected, the display
returns to the TOP screen. (☞1)
When an FDK with a left/right flap is connected, the display returns
to the Select flap screen. (☞3)
－ 10 －
▲ ▼
buttons.
Set button. The display
▼ buttons. Note
Set button, the selected
☞2
☞3