High Power Operation - Mitsubishi RC-EX3 User Manual

High power operation

The high power operation adjusts the room temperature quickly to a pleasant level by increasing the operation
capacity.
The high power operation continues for 15 minutes at the maximum and returns to the normal operation automatically.
When the operation mode is changed, the high power operation returns to the normal operation, too.
High power operation must be set to the F1 or F2 switch (☞page 63).
High power operation is set to the F1 switch as the factory setting.
15 ： 50 (Mon)
Cooling
Set temp
Timer
In operation for high power.
F1: High power F2: Energy-saving
1
Push the F1 ( F2 ) switch to start the high power operation.
Menu
■Operation will start when the F1 ( F2 ) switch is pushed, even if
Run/Stop switch is off.
Direction
■High power operation is only allowed when Heating or Cooling is selected for
the operation mode.
Message "In operation for high power." is displayed on the R/C
screen, and "—, —°C" is displayed on the Set temp button during
the high power operation.
■Set temp and change fan speed operations are disabled during high power
operation.
2
High power operation is terminated when you perform one of the
following.
・ When you terminate through a Run/Stop operation
・ When you change the operation mode
・ When15 minutes have elapsed since the high power operation
started
・ When you terminate the high power operation with the
F1 ( F2 ) switch
－ 14 －