Cautions For Each Setting Screen - Mitsubishi RC-EX3 User Manual

Input password
Input the administrator password.
Input 4 digit number & tap [Set]

Cautions for each setting screen

・ When returning to the screen mentioned below from each setting screen, operate the following buttons or switches.
■Return to Main screen ...
■Return to the last previous screen ... Back button
■Return to TOP screen ...
・ When the Back button is tapped without tapping the
are invalidated, and the display returns to the last previous screen. If the
way of setting, contents of the setting are invalidated, the setting mode is terminated and the display returns to the
TOP screen.
・ If no button is operated for approx. 5 minutes on the way of setting each item, the display returns to the TOP screen
automatically. Contents of the setting on the way become invalid.
・ Message "Invalid request" may be displayed when a button is pushed. This is not a fault but it is because the button
is set to the Prohibition.
(☞page 52)
・ It is necessary to stop the air conditioner by pushing the
If the Set button is tapped on the menu screen while the air conditioner is operating, the message "Invalid request."
is displayed.
■Individual flap control
■Energy-saving setting
5
When an item is referenced to
manual, the Input password screen is displayed after selecting the
menu.
Enter the administrator password (4-digit number) and tap the
Delete
When the password is unknown or wrong, the setting cannot be
Set
changed.
Back
Advice
· The administrator password is provided so that these operations and settings are
restricted to administrators/managers only (such as the owner of the building).
· For the administrator password at the factory setting, refer to the Installation
Manual.
When your administrator password is forgotten, initialize the password by referring
to the Installation Manual.
Menu button
Run/Stop switch
■Anti draft setting
■Administrator settings
Set button.
Set button on the way of setting, contents of the setting
Run/Stop switch before starting the following settings.
■Select the language
－ 20 －
Administrator password
Run/Stop switch is pushed on the
in this