Peak-Cut Timer - Mitsubishi RC-EX3 User Manual

■Peak-cut timer

Set the times to start and stop the capacity (upper limit) limiting operation and the peak-cut %.
Advice
· When the peak-cut timer is used, be sure to make the Clock setting in advance (☞page 33).
· The peak-cut timer control may not be performed depending on combination of IU and OU.
Peak-cut timer
Select the item.
Weekdays
All days
1
3
Peak-cut timer
1
Mon Tue Wed Thu
2
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
All Disable
Select the day of the week.
3
1
Sat, Sun
Each day
2
Back
4
2
Fri Sat Sun
3
Back
4
Tap the Menu button on the TOP screen and select
Energy-saving setting
When the setting range selection screen for the peak-cut timer is
displayed, select the day of the week to be set.
① Weekdays : Monday - Friday
② Sat. Sun : Saturday, Sunday (☞4)
③ All days : Monday - Sunday
④ Each day : Moves to the day of the week setting screen. (☞2)
If a desired day of the week ① is tapped on the display, contents of
current setting for the day are displayed.
(☞5)
For the holiday setting, tap the block ② under a day to switch
between " " (the holiday setting) and "(Blank)" (reset).
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
■To enable the timer on the day set as holiday, it is necessary to reset the holiday
setting.
When tapping ③ "All Disable" button, the timer does not operate on
all days of the week.
When the timer is used, be sure not to set "All Disable".
－ 22 －
⇒
Peak-cut timer .